cpc inox spa logo  
change language italiano english French deutsch
Home Page Azienda Prodotti e Servizi Magazino Tubi e Barre News e Focus Contatti
 

ROUND EDGE FLAT BARS

barre a bordi tondi

CPC Inox can produce both deburred and round edge strips.
The deburring process eliminates the burr caused by trimming without diminishing the width.
Edges are made round up to the cut surface so that tolerance on width is fully preserved.

 
 

Starting form a round edge strip it is possible to obtain flat bars from 8mm up to 150mm wide and from 1,5mm up to 6mm thick, as indicated in the ‘DIMENSION’ chart here on the side.
Round edge flat bars’ maximum length is 12metres.
Round edge flat bars can also be polished.