Flat Products
Our approach is based on the STEEL READY philosophy
We produce a wide range of strips, bars, sheets and tubes in stainless steel, always in stock and available for immediate delivery, to be ready to meet your needs promptly and accurately. We put our experience and the best technologies at the service of our customers to offer them the best possible solution.
CUT-TO-LENGTH STRIPS
We have 13 slitters, and can produce a wide range of products from 0.1 mm up to 14 mm thick, both cold-rolled and hot-rolled.
MACHINED EDGE STRIPS
We produce machined edge strips, both deburred and round, from 0.6 to 2.5 mm thick and 8 to 50 mm wide, and from 3 to 6 mm thick and 10 to 120 mm wide.
SHEETS AND PLATES
Thanks to two flattening lines, we can produce sheets and plates from 0.4 mm to 14 mm thick, with widths from 150 mm to 2000 mm and lengths from 300 mm to 12000 mm.
SLIT AND ROUND-EDGED FLAT BARS
With as many as 4 machines we can produce slit flat bars from 1 mm to 14 mm thick, with widths from 8 mm to 350 mm and lengths from a minimum of 0.5 metres to a maximum of 12 metres. Round-edged slit flat bars from 1.5 mm to 6 mm thick, with widths from 10 mm to 120 mm and lengths up to 12 metres complete the offer.
SATIN-FINISHED ROUND-EDGED SLIT FLAT BARS
We produce one- to four-sided satin-finished slit flat bars (standard or customised satin grain), from 3 mm to 14 mm thick, with widths from 20 mm to 200 mm and lengths from a minimum of 3 metres to a maximum of 7 metres.
The range of satin-finished products is also completed by slit flat bars with round satin-finished two-sided edges (standard satin grain or on specific request), from 3 mm to 6 mm thick,, with widths from 20 mm to 120 mm and lengths from a minimum of 3 metres to a maximum of 7 metres..
